New Product 11 Inch Flexible Touch Screen Panel

New Product 11 Inch Flexible Touch Screen Panel

The 11 inch flexible touch screen panel with cypress touch controller ic can support operation with gloves, water , and working well with additional 10mm thick tempered glass on the top.
Send Inquiry
Description
Technical Parameters

This new product 11 inch Flexible touch screen panel with cypress touch controller ic can support operation with gloves, water , and working well with additional 10mm thick tempered glass on the top. Structur ADheside+Film+PI,supoort multi touch points.This capacitive flexible touch screen panel has no visible area to match the display.



Model NumberHX1101803 V1.0
BrandGrahowlet
Size11.0 inch
Interface TypeIIC/USB
StructureADheside+Film+PI
Controller ICCypress
Touch Points10 points
Transparency≥85%
Surface Hardness≥3H
Operating Environment-20℃ ~ 70℃,≤85% RH
Storage Environment-30℃ ~ 80℃,≤85% RH
Power Supply Voltage2.8V ~ 3.3V
Outline Dimension267.00(W)x133.00(H)x3.88(D) mm
Touch Area250.00(W)x120.00(H)
Viewing AreaNO
Support SystemsWindows/Android/Linux etc.
Warranty1 year

HX1101803


Technical Q&A

Q: About the capacitive screen we are using now, the power supply interference problem is very serious. What should we do to eliminate the interference of the power supply? Apart from scanning frequency to avoid the noise frequency of the power supply, improve the signal-to-noise ratio of the screen? Is there any other way? 

A: Seeing from all current cases, power supply interference is mainly concentrated in large-size TP (7inch or above), and we have the following solutions: 

(1) Choose a quality power supply. This is very important and the most effective and fundamental way to solve power disturbances; 

(2) Frequency hopping. Use the spectrum analyzer to find the area where the common mode interference strength of the adapter is small, and then set the TX scan frequency to this area through software setting, which can effectively control the interference. If there is interference in the full frequency band, it is recommended to abandon the adapter; 

(3) Improve the signal to noise ratio. In the initial design of TP (7.0inch or above), consider using the low-impedance surface-rent material for the RX signal channel and using the design of the double-sided trace. Try to control all the channel resistances within 10K, which can effectively control the power supply interference. ; 

(4) It is also possible to change the charger, increase the algorithm filtering, and adopt Cypress, EETI, ILI schemes with strong anti-interference performance.

Hot Tags: new product 11 inch flexible touch screen panel, China new product 11 inch flexible touch screen panel suppliers, manufacturers, factory