-This is a 15.6 inch capacitive touch panel, USB interface, USB touch screen panel, to connect to your computer mainboard by plug and play, no driver needed. This touch screen can work in all kind of Operaion syetem like windows, Linux, Andirod and so on.
-15.6 inch capacitive touch screen panel is mainly applied in Industrial area, like industrial control, medical, automotive, this 15.6 inch USB touch screen panel is with Glass sensor +Glass cover lens . this 15.6 inch USB touch screen panel support operation with gloves or thick cover lens/ glass; this 15.6 inch USB touch panel can be customized with different solutions, outside dimensions and other parameters can be re-designed as per your specific need..
-For more information please see table below or contact supplier directly:
CTP | Model Number | HX1561703 |
Brand | Grahowlet | |
Size | 15.6 inch | |
Operating Temperature | -20℃ ~ 70℃ | |
Storage Temperature | -30℃ ~ 80℃ | |
Outline Dimension | 387.00(W)x231.00(H)x2.05(D) mm | |
Viewing Area | 344.00(W)x194.00(H) mm | |
Support Systems | Windows/Android/Linux etc. | |
Warranty | 1 year | |
Interface Type | USB | |
Material/Structure | G+G | |
Controller IC | ILITEK | |
Touch Points | 10 points | |
Transparency | 85% | |
Surface Hardness | 6H | |
Power Supply Voltage | 5V |
Packing
Technical Question
Q: For the product with outdoor application environment , which needs to meet the requirement of sunlight readable , What should be paid attention to when selecting models?
A: 1. It is necessary to consider the wide temperature working temperature of the capacitive touch screen and the display screen, at least -20 to 70 degrees should be met, the final decision should be made depending on the actual product application environment;
2. If the power consumption is important and the cost is not so strictly limited, the best choice is semi-transparent display screen. If the cost and size is important, the display screen must meet the requirements of highlighting;
3. The capacitive touch screen cover glass can be done with AG or AR + AF. As for whether the display and touch should be optical bonded, it is not a “must” but a bonus.
Q: What is the reason for the capacitive screen module turn white screen when it fall to the ground after being assembled into a finished product?
A: The reasons are probably: IC cracking, poor FPC binding, structural interference LCD cracking, etc.; IC is broken when falling, FPC bonding not good, structural interference, LCD broken…
IC broken is because it is impacted by external force, for example, first, there is something on the casing or there is something inside the LCM that hit the IC here; second is that the edge that the IC sits on is deformed for some reason, causing the IC height to exceed the backlight surface and then break when falling;
the countermeasure is to check the components near the IC that may impact it, to leave it as far as possible from the IC or add some protection for IC;
Contact:
Hot Tags: usb touch screen panel, China usb touch screen panel suppliers, manufacturers, factory
