Automotive Capacitive Touch Screen

Automotive Capacitive Touch Screen

Product Name: Automotive Capacitive Touch Screen
Size: 10.1 inch
Touch Type:P-CAP
Interface: IIC or USB
Display Type:IPS TFT LCD PANEL
Luminance:800cd/m2
Interface:LVDS/HDMI/VGA
Send Inquiry
Description
Technical Parameters

Product Description


The 10.1 inch automotive capacitive touch screen uses cypress touch controller ic, industrial application partially, G+G structure, strong anti-jamming performance, support operation with water, gloves, and thickening tempered glass or thick PC material on the top surface. mainly used in the industrial, outdoor portable terminal, smart home appliances, medical electronics, automotive and other fields, surface special treatment and structure can be customized.

This 10.1 inch automotive capacitive touch screen module is a high-brightness standard module product, which is launched for outdoor use. It has LVDS interface and 1280X800 resolution. It can be converted into different interface types to match the actual application needs of customers. It has good anti-interference performance. It has been applied in agricultural machinery, vehicle control terminals, outdoor measuring instruments, charging piles and other products.


For dimension details, please contact the supplier or refer to the chart below:

 

 

Model NumberHX1011801
BrandGrahowlet
Size10.1 inch
Operating Temperature-20℃ ~ 70℃
Storage Temperature-30℃ ~ 80℃
Outline Dimension247.96(W)x166.60(H)x7.55(D) mm
Viewing Area217.76(W)x136.40(H) mm
Active Area216.96(W)x135.60(H) mm
Support SystemsWindows/Android/Linux etc.
Warranty1 year
Interface TypeIIC/USB
StructureG+G
Controller ICCypress
Touch Points10 points
Transparency≥85%
Surface Hardness≥6H
Power Supply Voltage2.8V ~ 3.3V
Resolution1280X800
Interface TypeLVDS/HDMI/VGA
Luminance800 cd/m²
Viewing Angle85/85/85/85

HX1011801

Custom Service


 

Custom Service

If you want USB interface, we can supply IIC to USB bridgeboard

photobank (9)

 

Technical Q&A


Q: What can Grahowlet technology do? Can you briefly introduce it?

A: The capacitive screen solution includes: Cypress , Goodix, Focal tech, ATMEL, EETI, ILI, etc. The cover lens, sensor and FPC of the touch can be customized in depth according to the actual needs of customers;

The display solution includes: the current mainstream display glass panel, and we can customize the brightness of the display screen, FPC shape, interface definition, driver IC solution according to the actual needs of customers, etc.

Q: Is there any suggestion regarding the capacitive touch screen module solutoin directly used by raspberry pi and orange pi? 

A: We have some mature projects cases and the best way is to connect the touch screen directly through USB interface to the Raspberry Pi or the orange Pi, and the display can be directly connected through HDMI interface, this way the whole solution can be implemented through plug and play. Large size touch screen will be designed directly with USB interface, small size is general designed with IIC interface, so we will do is to provide the board which changes the IIC into USB. however, customers need to contact our technicians to check the configuration and software system. For display, we can provide RGB to HDMI, LVDS to HDMI, MPI to HDMI, EDP to HDMI and other driver boards to realize the connection with Raspberry Pi and orange pi;

Q: For the product with outdoor application environment , which needs to meet the requirement of sunlight readable , What should be paid attention to when selecting models?

A: 1. It is necessary to consider the wide temperature working temperature of the capacitive touch screen and the display screen, at least -20 to 70 degrees should be met, the final decision should be made depending on the actual product application environment;

2. If the power consumption is important and the cost is not so strictly limited, the best choice is semi-transparent display screen. If the cost and size is important, the display screen must meet the requirements of highlighting;

3. The capacitive touch screen cover glass can be done with AG or AR + AF. As for whether the display and touch should be optical bonded, it is not a “must” but a bonus.

contact us:hongxiao@grahowlet.com

Hot Tags: automotive capacitive touch screen, China automotive capacitive touch screen suppliers, manufacturers, factory